Category Archives: Bulkheads

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

QiiMii Stainless Steel 304 Bulkhead 1.5” TC home-brew Kettle Bulkhead Compression Fitting NPT Thread

More Info
Highlighted Features
  • Material: Made with heavy duty 304 food grade stainless steel, health and safety
  • Works on kettle as small as 12" in diameter
  • Weldless design Ideal for FTSs and Brew Bucket flat lid pressurized transfers
  • 304 Stainless Construction and High heat compatible silicone gaskets
  • The silicone O-ring is included and gets captured in a groove like our other True Bulkheads

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Bulkhead Compression Fitting 1.5” Tri Clamp Weldless Bulkhead 304 Stainless Steel Homebrew Kettle Bulkhead – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear + How-to: Add A Tri-Clamp To Your Homebrew Keg

Bulkhead Compression Fitting 1.5” Tri Clamp Weldless Bulkehad 304 Stainless Steel Homebrew Kettle Bulkhead

Bulkhead Compression Fitting 1.5” TC homebrew Weldless Bulkhead 304 Stainless Steel Homebrew Kettle Bulkhead

More Info

From the product description, check product page for current description, price and availability:

  • Add a 1.5″ TC flange to virtually any vessel!Just drill a 41MM hole and tighen the locknut with 1pcs extra Food grade gasket..
  • 304 Stainless Construction and High heat compatible silicone gaskets.
  • The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • Works on kettle as small as 12″ in diameter.
  • Weldless design Ideal for FTSs and Brew Bucket flat lid pressurized transfers

 

Bulkhead Compression Fitting 1.5” Tri Clamp Weldless Bulkhead 304 Stainless Steel Homebrew Kettle Bulkhead – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp: Brewers Hardware has a gigantic selection of Tri-Clover Compatible Fittings including some really unique offerings  | Tri-Clamp Fittings at Proflow Dynamics

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Homebrewer’s Outpost 1/2″ Stainless Steel Bulkhead

Homebrewers Outpost - H726 S/S Bulkhead 1/2" FPT x 1/2" MPT

Homebrewers Outpost – H726 S/S Bulkhead 1/2″ FPT x 1/2″ MPT


From the product description, check product page for current description, price and availability:

  • Add a ball valve for thermometer to a kettle
  • Stainless construction

Homebrewers Outpost – H726 S/S Bulkhead 1/2″ FPT x 1/2″ MPT – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

4 Piece Stainless Steel Weldless Bulkhead Kit

4 Piece Stainless Steel Weldless Bulkhead


From the product description, check product page for current description, price and availability:

  • Fittings kit to mount 1/2″ NPT Ball Valves to brew kettles or whiskey stills
  • Works on Brew Kettles, Whiskey Stills, and Sparge water pots
  • Just add teflon pipe tape to where the nut will be.
  • See photos for installation

WELDLESS BULKHEAD KIT 4PC for BREW KETTLE or WHISKEY STILL – STAINLESS STEEL 1/2″ NPT HOMEBREW EQUIPMENT – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

ProFlow Dynamics Sale Gear + Three Stacking Deals

proflow dynamics sale clerance

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

  • Proflow has put a number of items on sale – those sales stack with the two discounts outlined here!
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!
  • Shipping is an additional cost based on your location.  Because of minimum shipping costs, it may make sense to place a larger order.  Additional items may ship for minimal cost.

Sale ItemsProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear + How-to: Add A Tri-Clamp To Your Homebrew Keg

1.5” TC homebrew Weldless Bulkhead

More Info
Highlighted Features
  • Add a 1.5" TC flange to virtually any vessel!Just drill a 41MM hole and tighen the locknut with 1pcs extra Food grade gasket..
  • 304 Stainless Construction and High heat compatible silicone gaskets.
  • The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • Works on kettle as small as 12" in diameter.
  • Weldless design Ideal for FTSs and Brew Bucket flat lid pressurized transfers

 

 

homebrew Sanitary Weldless Bulkehad,1.5″ TC Bulkhead Compression Fitting,1.5″Triclamp for Homebrew Kettle Bulkhead – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp: Brewers Hardware has a gigantic selection of Tri-Clover Compatible Fittings including some really unique offerings  | Tri-Clamp Fittings at Proflow Dynamics

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

ProFlow Dynamics Sale Gear + Three Stacking Deals

proflow dynamics sale clerance

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

  • Proflow has put a number of items on sale – those sales stack with the two discounts outlined here!
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!
  • Shipping is an additional cost based on your location.  Because of minimum shipping costs, it may make sense to place a larger order.  Additional items may ship for minimal cost.

Sale ItemsProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

ProFlow Dynamics Sale Gear + Two Stacking Deals

proflow dynamics sale clerance

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

  • Proflow has put a number of items on sale – those sales stack with the two discounts outlined here!
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!
  • Shipping is an additional cost based on your location.  Because of minimum shipping costs, it may make sense to place a larger order.  Additional items may ship for minimal cost.

Sale ItemsProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Tri-Clamp Fittings at ProFlow Dynamics 15%+10% Off

homebrew tri clamp deals

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Tri-Clamp Fittings  | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdtc

15%+10% Off ProFlow Dynamics Homebrew Gear

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Stacking Deals!

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

ProFlow’s Homebrew Lineup << Use this link for 10% off + promo code BREW15% for another 15%

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdsale

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

TWO x Stainless Steel Bulkheads

Beduan Stainless Steel 1/2" Bulkhead Weldless Fitting Beer Wine Brewing Thru-Bulk Connector (Pack of 2)

2 x Stainless Steel Weldless Bulkheads


From the product description, check product page for current description, price and availability:

  • Fittings kit to mount 1/2″ NPT Ball Valves to brew kettles or whiskey stills.
  • Works on Brew Kettles, Whiskey Stills, and Sparge water pots.
  • Just add teflon pipe tape to where the nut will be.
  • Made of high quality stainless steel, corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Beduan Stainless Steel 1/2″ Bulkhead Weldless Fitting Beer Wine Brewing Thru-Bulk Connector (Pack of 2) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

Bulkhead Compression Fitting, 1.5”TC Kettle Homebrew Weldless Bulkehad Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead With Silicone Ring (1.5”)

More Info

From the product description, check product page for current description, price and availability:

  • 🌟 HIGH QUALITY — Made of 304 high‑hardness stainless steel,with food‑grade silicone gasket,sturdy and durable, wear‑resistant.good sealing performance
  • 🌟 WELDLESS DESIGNED — Add a 1.5″ TC flange to virtually any vessel,Weldless Bulkehad Compression Fitting allows you to add a TC port to any vessel no need welding or soldering,Ideal for FTSs and Brew Bucket ,Just drill a 41MM hole and tighen the locknut.
  • 🌟 APPLY TO — Suitable for kettles, beer kegs, cola kegs, soda buckets with a diameter less than 12in.Perfect for kettle or keg,it is a practical home brew kettle accessory
  • 🌟 HOW TO INSTALL — The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • 🌟 PLEASE NOTE — Hole Size Required 32.5mm,the lock nut hex measures 48mm,works on kettle just as small as 12″ in diameter.

 

Bulkhead Compression Fitting, 1.5”TC Kettle Homebrew Weldless Bulkehad Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead With Silicone Ring (1.5”) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Homebrewer’s Outpost 1/2″ Stainless Steel Bulkhead

Homebrewers Outpost - H726 S/S Bulkhead 1/2" FPT x 1/2" MPT

Homebrewers Outpost – H726 S/S Bulkhead 1/2″ FPT x 1/2″ MPT


From the product description, check product page for current description, price and availability:

  • Add a ball valve for thermometer to a kettle
  • Stainless construction

Homebrewers Outpost – H726 S/S Bulkhead 1/2″ FPT x 1/2″ MPT – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear + How-to: Add A Tri-Clamp To Your Homebrew Keg

Bulkhead Compression Fitting 1.5” Tri Clamp Weldless Bulkehad 304 Stainless Steel Homebrew Kettle Bulkhead

Bulkhead Compression Fitting 1.5” TC homebrew Weldless Bulkhead 304 Stainless Steel Homebrew Kettle Bulkhead

More Info

From the product description, check product page for current description, price and availability:

  • Add a 1.5″ TC flange to virtually any vessel!Just drill a 41MM hole and tighen the locknut with 1pcs extra Food grade gasket..
  • 304 Stainless Construction and High heat compatible silicone gaskets.
  • The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • Works on kettle as small as 12″ in diameter.
  • Weldless design Ideal for FTSs and Brew Bucket flat lid pressurized transfers

 

Bulkhead Compression Fitting 1.5” Tri Clamp Weldless Bulkhead 304 Stainless Steel Homebrew Kettle Bulkhead – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp: Brewers Hardware has a gigantic selection of Tri-Clover Compatible Fittings including some really unique offerings  | Tri-Clamp Fittings at Proflow Dynamics

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

4 Piece Stainless Steel Weldless Bulkhead Kit

4 Piece Stainless Steel Weldless Bulkhead


From the product description, check product page for current description, price and availability:

  • Fittings kit to mount 1/2″ NPT Ball Valves to brew kettles or whiskey stills
  • Works on Brew Kettles, Whiskey Stills, and Sparge water pots
  • Just add teflon pipe tape to where the nut will be.
  • See photos for installation

WELDLESS BULKHEAD KIT 4PC for BREW KETTLE or WHISKEY STILL – STAINLESS STEEL 1/2″ NPT HOMEBREW EQUIPMENT – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Our Discount is Back!… Tri-Clamp Fittings at ProFlow Dynamics 15%+10% Off

homebrew tri clamp deals

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Tri-Clamp Fittings  | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdtc

ProFlow Dynamics Sale Gear + Two Stacking Deals

proflow dynamics homebrew sale

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

  • Proflow has put a number of items on sale – those sales stack with the two discounts outlined here!
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!
  • Shipping is an additional cost based on your location.  Because of minimum shipping costs, it may make sense to place a larger order.  Additional items may ship for minimal cost.

Sale ItemsProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Our Discount is Back!… 15%+10% Off ProFlow Dynamics Homebrew Gear

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Stacking Deals!

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

ProFlow’s Homebrew Lineup << Use this link for 10% off + promo code BREW15% for another 15%

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdsale

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

Bulkhead Compression Fitting 1.5” Tri Clamp Weldless Bulkehad 304 Stainless Steel Homebrew Kettle Bulkhead

Bulkhead Compression Fitting 1.5” TC homebrew Weldless Bulkhead 304 Stainless Steel Homebrew Kettle Bulkhead

More Info

From the product description, check product page for current description, price and availability:

  • Add a 1.5″ TC flange to virtually any vessel!Just drill a 41MM hole and tighen the locknut with 1pcs extra Food grade gasket..
  • 304 Stainless Construction and High heat compatible silicone gaskets.
  • The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • Works on kettle as small as 12″ in diameter.
  • Weldless design Ideal for FTSs and Brew Bucket flat lid pressurized transfers

 

Bulkhead Compression Fitting 1.5” Tri Clamp Weldless Bulkhead 304 Stainless Steel Homebrew Kettle Bulkhead – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp: Brewers Hardware has a gigantic selection of Tri-Clover Compatible Fittings including some really unique offerings  | Tri-Clamp Fittings at Proflow Dynamics

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

Bulkhead Compression Fitting, 1.5”TC Kettle Homebrew Weldless Bulkehad Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead With Silicone Ring (1.5”)

More Info

From the product description, check product page for current description, price and availability:

  • 🌟 HIGH QUALITY — Made of 304 high‑hardness stainless steel,with food‑grade silicone gasket,sturdy and durable, wear‑resistant.good sealing performance
  • 🌟 WELDLESS DESIGNED — Add a 1.5″ TC flange to virtually any vessel,Weldless Bulkehad Compression Fitting allows you to add a TC port to any vessel no need welding or soldering,Ideal for FTSs and Brew Bucket ,Just drill a 41MM hole and tighen the locknut.
  • 🌟 APPLY TO — Suitable for kettles, beer kegs, cola kegs, soda buckets with a diameter less than 12in.Perfect for kettle or keg,it is a practical home brew kettle accessory
  • 🌟 HOW TO INSTALL — The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • 🌟 PLEASE NOTE — Hole Size Required 32.5mm,the lock nut hex measures 48mm,works on kettle just as small as 12″ in diameter.

 

Bulkhead Compression Fitting, 1.5”TC Kettle Homebrew Weldless Bulkehad Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead With Silicone Ring (1.5”) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.