via William’s Brewing Adjustable Pressure Relief Valve Assembly with 0 to 60 PSI gauge. The PRV valve has a range of 0 to 15 PSI. Has a 1/4″ female flare fitting (connect to your own pin or ball lock QD).
A Spunding Valve has lots of applications…Spunding Valve Uses
- Pressurized fermentation. Ferment in a 5 or 10 gallon corny keg and use your Spunding Valve instead of an airlock. This allows you to ferment at your desired pressure.
- Dry hop under pressure. This allows you to dry hop earlier while reducing oxygenation. Active yeast are more likely to metabolize oxygen that’s introduced during dry hopping during active fermentation. Since CO2 is not exiting beer as vigorously under pressure, wanted compounds, flavors and aromas are more likely to stay in your beer under pressure.
- Naturally and accurately carbonate beer right in the keg.
- An airlock replacement. Keep the valve wide open for non-pressurized fermentations. Only do this if you have plenty of head space. This wouldn’t make a great blow off tube.
- Keg to keg transfers. Use the Spunding Valve to allow excess gas to exit the receiving keg as you transfer under pressure. Helps you achieve a slow, controlled and pressurized transfer.
- Fix over-carbonated beers. Use the same general process as for carbonation (skipping the addition of fermentable sugar). Use a carbonation chart to determine proper pressure for the temperature the keg is at. The Spunding Valve allows excess pressure to vent until the new carbonation level is achieved. You can agitate the keg to fix carbonation more quickly.
- Test for keg leaks. Pressurize your keg to serving pressure. Put the Spunding Valve on (with the pressure set well above your serving PSI) and note the reading. The gauge should remain steady. If pressure drops, you know you have a keg leak. It’s worth noting that this checks the entire keg including gas body o-ring. That spot is hard to check and other way as it’s only in function when the gas QD is on. When the gas QD is on… it’s difficult to spray and check for bubbles underneath the gas QD. Thanks to Scott Janish for this tip!
- As an airlock for long term aging of beers. Airlocks can run dry over time. A Spunding Valve will not.
Lots more about Spunding Valves on our Spunding Valve Build Resource Post
If you’ve been eyeing our Spunding Valve Build, but don’t want to put it together yourself, here’s your chance. William’s Brewing generally has this for $29.99. Check the product page for current price, description and availability.
HBF Reader Christian Says… “I have four of these. Use them for fermenting under a controlled pressure. Also use them for counter pressure transfers. Highly recommend.”
40% Off Clearance! William’s has launched a year end clearance sale. Loads of items are discounted by 40%. They are suggesting that you order early because selection is limited and they only have a few of some items. No coupon or promo code is required. Add items to your cart to see discounted price. Check William’s for current selection and availability.
Update: This promo has expired or pricing, availability or description has changed – Check the supplier’s site or product page for current availability
Recent Deals! Last Fifty Finds
Top Post: Build a Spunding Valve! – How and Why
Visit William’s Brewing – Web Only Clearance Sale
Recent William’s Brewing Finds [view more]: