Barley Crusher W/ 7 Lb.-Capacity Hopper
From the product description, check product page for current description, price and availability:
“Our most popular grain mill, a high quality, precision-machined mill that is easy to set up and use. A consistent, precise crush is vital for making the best beer possible, and The Barley Crusher delivers. This mill comes from the manufacturer and some of the best features on the market. Solid base fits easily on a standard 6.5 gallon fermenting bucket. Adjustable rollers with a .015 to .070 range. Materials that will last a lifetime: 1018 Cold Rolled Steel for the rollers, 6061 Aluminum for the mill body and hopper, tool steel for the axles with oil-impregnated bronze bushings. 5-inch rollers have a 12 TPI knurl that pulls grain through while leaving the hull intact to form an excellent filter bed for sparging. Large hopper holds approximately 7 pounds of grain. Includes a hand-crank but no adapters are needed to use a 3/8 drill motor; using a 3/8 drill motor at 500 RPM gives a throughput of 6 pounds a minute.”
Crush is a pretty big deal when it comes to efficiency. Homebrew shops have a tendency to under mill grain. I think the reason for that is ease of use, with the thinking that a more coarse crush equals few stuck mashes and more happy customers. I guess it’s possible that a shop mill could over mill grain too. The point is, when you’re using someone else’s mill, it’s up to them how you mill your grain.
Milling your own grain… 1. Gives you control over the crush of your grain. 2. A mill allows you to fine tune for your equipment and process. You know what the crush is going to be since you set it. 3. A mill allows you to save money by buying whole bags of grain at a discount, and 3. The shelf life of unmilled grain is longer than pre-milled grain. Freshly milled grain = better tasting beer.
More: Recent Amazon Recent Amazon Finds [view more]:
Recent Amazon Finds [view more]: