Mark III Gas Regulator – $46.99

mark iii gas regulator

Mark III Gas Regulator via William’s Brewing.  About: “The Mark III Regulator by Keg King provides a reading of keg dispensing pressure, as well as an accurate indication of cylinder gas level. By turning the chrome center knob, you can adjust the dispensing pressure from 0 – 60 PSI. The Mark III features gauges housed in rubber to protect them from dings, as well as a large 2½” diameter diaphram so it can both handle several kegs at once if needed, and the large diaphragm also lets you have precise control over the dispensing pressure (which you adjust with the center knob).”

More Info

“Threaded ¼” flare outlet fits our D03 Gas Connector (no need to adapt your ¼” gas tubing to fit the 5/16″ wide hose barb found on other beer regulators). Includes a safety relief valve, but does not have a check valve built into the bottom inlet. This regulator includes two nylon tank sealing washer, and will accept nylon or fiber tank sealing washers.

The high pressure gauge threads are traditional right hand, as are the threads for the lower flare outlet fitting. You can unscrew these and install any standard 1/4″ male NPT check valve (such as our items I91 and Q87).”

 

As of this posting, this is selling for $46.99.  Check site for current availability.

MARK III GAS REGULATOR

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

 

Visit William’s Brewing – Web Only Clearance Sale

More: Recent William’s Brewing Finds

Leave a Reply

Your email address will not be published. Required fields are marked *