Mark II Wort Pump – from $64.99

MARK II WORT PUMP

Mark II Homebrew Pump from William’s Brewing

from William’s Brewing: The MKII Pump from Keg King is a magnetic drive high temperature pump capable of pumping hot wort at temperatures of up to 248° F. It can pump up to 5 gallons per minute, making it perfect for 5 to 20 gallon systems. The maximum height it can pump is 10’ although gallons per minute will be reduced at higher pumping elevations.

The pump head and impeller are constructed of food grade polysulphone. The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Like all magnetic drive wort pumps, it is not self priming – you must flood the pump head before turning on the pump. The pump has ½” BSP male fittings on the inlet and outlet, which are compatible with all our ½” female NPT fittings. The inlet is in the center.

The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped. The pump features a 67” power cord, and a mounting plate for permanent mounting. The pump is 7¾” in overall length, and 3¼” wide including the mounting plate. The polysulfone head can be mounted at any angle on the pump to fit your application (an optional stainless head, William’s item Q80, is also available). Shop around and compare, we think this is the best value currently available in a high temperature wort transfer pump.

As of this posting, the pump with polysulfone head is selling for $64.99, That’s $5 less than when we first posted about this pump,  The stainless head upgrade is only $28.99 more.  Check William’s Brewing for up to the minute price and availability.

MARK II WORT PUMP || STAINLESS PUMP HEAD FOR MARK II WORT PUMP

Visit William’s Brewing – Web Only Clearance Sale

More: Recent William's Brewing

Leave a Reply

Your email address will not be published. Required fields are marked *