Guest Review: Bouncer Inline Beer Filter

Special Thanks to Jerry at AdventuresInHomebrewing.Beer for this Guest Post

by Jerry at AdventuresInHomebrewing.Beer:

Have you ever paid attention to any of those” suggested posts” on Facebook? More often than not, I just swing right by. One did catch my attention though, it was for the Bouncer. I am glad I took the time to really check it out, and contact Tim and Doug about what looked to be a really cool product. Homebrewing is filled with gadgets, and guys find really cool ways to to fix problems we run into. The Bouncer and the Bouncer MD solve all sorts of floating issues! It is two different beer inline filters that accomplish great things! So here is my product review of the Bouncer and Bouncer MD home brew beer inline filters. If you want the cliff notes, the answer is yes….go buy it….you won’t be disappointed. Oh wait, you want more details? Read those below.
In order to use the Bouncer or the Bouncer MD, you do need to put them inline with your tubing. For the regular Bouncer, it needs to be between your bottling bucket and the bottling wand.

Filtering a SMaSH homebrew on it’s way into a bottle

For the Bouncer MD, the best spot is between the siphon and the fermenter or carboy. For the regular Bouncer, I had no problems hooking it up. The tubing I had for my bottling bucket and wand was just the right diameter. A few snips and some tubing under some hot water, and I was ready to rock and roll.

Bouncer MD inline homebrew beer filter

For the Bouncer MD, I did have to make a few modifications. My siphon used a larger diameter tube then what was needed to hook up. So I swung by the LHBS and picked up a hose clamp. The clamp goes on the siphon size, and I put some fresh, smaller diameter, tubing on the other side.

For my first run with the regular Bouncer, I bottled about 12 gallons total. It was two different batches of SMaSH recipes that I made, SMaSHing Nuggets 2 and SMaSHing Space Nuggets. To be fair, these batches were relatively clear of a ton particles, or floaties, They are a very simplistic beer, and I took the time to bag all those freshly picked, wet, whole leaf hops. These were wet hops recipes, so there was more than a pound of whole leaf hops in each batch. But to be fair, wet hops do not flake apart like dried hops. After running through each 6 gallon batch, I was able to pull some stuff out from reaching my finished product. Here is a video review of the Bouncer. For each batch, you can see some particles and hop leaves get filtered out. Will I keep using it? You betcha.

This primary fermentation was filled with whole hops

For my first test of the Bouncer MD, I threw it right to the proverbial fire. The batch was filled with a ton of whole hops. I as I noted in my PSA, I should have bagged these suckers! But, alas, I didn’t. So this batch was filled with a ton of stuff to filter. I did not put the sediment filter cap on the siphon, I just dunked it in and let it go. This was a transfer from a primary to a secondary, so removing a ton of stuff is a good thing. The siphon from one vessel to the other did take a little more time, but I went from a larger tube, to a slightly smaller diameter one, so that is fair and expected. When I was done, there was some hop leaves in the ca , and a bunch of stuff left on the screen and in the bottom of the Bouncer MD.

The second test of the Bouncer MD was transferring a simplistic porter from a fermenter to a keg. I unfortunately didn’t take video of this one. Honestly, I didn’t think there would be much filtered out. I was VERY wrong! The fermenter was the FastFerment conical fermenter. I shoved the siphon down in and let it go. I noticed towards the end of the first 5 gallons, the siphon seemed to slow down. I figured there was something stuck in the end of it. I never thought to check the Bouncer MD. Low and behold, at the end of filling my keg, I opened up the Mac Daddy. HOLY COW! This thing kept my beer filtered like a champ! Since the beer was super dark, I didn’t notice that the whole screen was covered on the inside. This filter kept mass amounts of sediment out of my keg. I am super thankful for this.

Overall, I am super impressed with both the Bouncer and the Bouncer MD. The Mac Daddy has filtered out more for me then the regular one. I still won’t run any batch through without the filters attached any more. The Bouncer is available on Amazon, and in a few homebrew shops. The Bouncer MD will be available soon. Tim and Doug have made a tool that you don’t realize how much you need it, until you use it! This brewer gives them two thumbs up!

Thanks again to Jerry for his review.

Note: As of this posting the Bouncer MD is unavailable for purchase.  The regular size is available on Amazon.

Recent Great Deals [more]:

3 thoughts on “Guest Review: Bouncer Inline Beer Filter

    1. admin Post author

      I’ll give it to you that this looks similar. My concern about that would be… are the materials used food safe?

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *