1/4″ Male NPT to 1/4″ Female Flare + Make a Spunding Valve

Eaton Weatherhead 9100X4X4 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Swivel, Adapter, 1/4" NPT Male x 1/4" JIC Female

Eaton Weatherhead 9100X4X4 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Swivel, Adapter, 1/4″ NPT Male x 1/4″ JIC Female.  Adapts 1/4″ NPT male end to 1/4″ JIC 37-degree flare female swivel.  Made from carbon steel.

This fitting is featured in our Spunding Valve Build.   cln_tn_spundingA Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and more.See: [Build a Spunding Valve].

Note: If you want to replicate my build, make sure to choose the 1/4″ NPT x 1/4″ JIC size.  The product page may display other sizes

Update: Since this post was published the price, availability or promotion has changed.  Check the product page for current description, price and availability.  Also: Today’s Deals on Amazon

.

Eaton Weatherhead 9100X4X4 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Swivel, Adapter, 1/4″ NPT Male x 1/4″ JIC Female

More: Recent Amazon Finds


Build a Spunding Valve – Step by Step

prod:B00BKFXJ0C

One thought on “1/4″ Male NPT to 1/4″ Female Flare + Make a Spunding Valve

  1. Scott

    Hey
    I picked up the swivel and all the parts you reference. The issue I have is the readings on the valve are not that accurate. I didn’t get the parts in time to naturally ferment but tried it out after I force carbed. Set valve to what I thought was just over 10 (target 12) and put it in the keg and all the CO2 basically left per the gauge. Re added CO2 and to maintain 12 psi per the gauge the spunding valve would have to be at almost 30. Is this your experience?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *