Taprite Dual Gauge CO2 Regulator. Easy hand adjustable pressure (no tools needed), barb outlet with ball valve shut off. Low pressure gauge reads 0 to 60 PSI. An optional protective gauge cage is also available.
Also the product page doesn’t say it, as of this posting, Taprite’s about page says that.. “Taprite products are proudly made in the USA”. Check site for current country of origin claims.
Product Description – Here – Use coupon code BEERDEAL to get this discount.
Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.More about the T742HP
When it comes to CO2 regulators, we’ve tried them all. This quality unit by Taprite is our favorite on the market. It’s no wonder this regulator is trusted by so many breweries and beer bars—it represents the best quality at a great price. Available in a standard, single-body model, as well as a dual-body model which allows you to send different pressures to two separate kegs from the same CO2 tank!
The things you’ll love about this regulator are:
- The large front knob makes pressure adjustment tool-free, easy & fast.
- The built-in gasket where the regulator connects to the CO2 tank eliminates the constant replacement of fiber washers every time you change out your tank.
- The barbed outlet features a one-way on/off valve which prevents backflow and protects the regulator’s internals.
- The gauges are easy to read. The low pressure gauge reads from 0 to 60 psi. The optional available gauge cage is the best on the market.
- This is the T742HP model, where the HP stands for high performance; it won’t freeze up when multiple taps are running at once.
- Best of all is the consistent pressure regulation. With many regulators the pressure can ‘creep’ up over time. This unit holds the pressure rock steady. No drifting.
More Tips & Tricks:
1. Are you out of CO2? When the needle reads half way in the red you are about 10% full. You should be able to push another 2-3gallons of beer when your at this amount of remaining gas.
2. What is an ideal serving pressure? For most beers a pressure set at 10-12PSI is the sweet spot. Your beer has to be stored cold from 34-40F for this pressure to work properly.
3. Is your beer serving a lot of foam? Don’t panic this is not hard to fix. Your beer line must be 5-8 feet in length for this to work. Turn the black check valve to the close position (as pictured). Release the pressure from your keg’s relief valve. Lower the pressure to 6-8psi by turning the flat head screw on the front of the regulator counter clock wise. Open the black check valve releasing CO2 to your keg. Try serving your beer.
4. Is my beer over carbonated? Any beer that is stored under pressure above 12psi will become overcarbonated. If you’re trying to speed up the process to carbonate your beer by raising your pressure anywhere from 15-20psi make sure you don’t leave your beer at this pressure for more than 2-3 days. If you did this you will need to release all the pressure from the keg before serving and set your serving pressure at 4-6psi depending the carbonation of your beer. After a week you will have to raise your pressure back to the optimum 10-12psi serving pressure.
Our Top Draft Resources More: Recent MoreBeer Recent More Beer [view more]:
More: Recent MoreBeer Recent More Beer [view more]:
Recent More Beer [view more]: